[hpsdr] vista update

[Ken]

OK - so I installed .NET 1.1 in the new (Vista) machine and the DttSP error 
message went away.

But it still does not start up the Mercury

What I did tonight was to init the OZY on the old computer then switch to 
the new computer and PowerSDR works fine (8% CPU loading at 192 k !)

So its the loader program that is not working.

I double-checked that the file set in the Vista computer is the same as the 
XP computer and that the device manager information about the OZY loader is 
the same in both computers.

here are the messages I typically get:
================================================================
C:\Program Files\MercuryFiles\Release>load_firmwareV1.1 0xfffe 0x0007 
ozyfw-sdr1
k.hex
finding busses...
finding devices...
usb_get_busses...
An error occurred: Object reference not set to an instance of an object.

C:\Program Files\MercuryFiles\Release>sleep 3000
Sleeping: 3000

C:\Program Files\MercuryFiles\Release>upload_FPGAV1.1 0xfffe 0x0007 
Ozy_Janus.r
bf
finding busses...
finding devices...
usb_get_busses...
An error occurred: Object reference not set to an instance of an object.

===============================================================
PS - actually, sometimes the first part works, but the second one fails

C:\Program Files\MercuryFiles\Release>load_firmwareV1.1 0xfffe 0x0007 
ozyfw-sdr
k.hex
finding busses...
finding devices...
usb_get_busses...
bus location: 0
Checking for VID PID...
Found VID PID: fffe 7
Trying to open device...
Device handle is: 9776424
Resetting CPU...Reset ON...
Result: True
Opening intel hex file: ozyfw-sdr1k.hex
Processed 740 lines...
Result: True
Taking CPU out of reset...
Result: True
Closing device...
done...

(followed by a failure of upload.....)

is my computer too fast?

Ken