[hpsdr] Come and get it, code's ready!

[Joe Martin K5SO]

So that positive results are reported too, I would like to report that  
the new software/firmware versions seem to work well here with my quad  
core 2.4 GHz WinXP x64 machine.  No modification to any file was  
necessary.  Updates from the SVN site installed without a hitch.

As an operational check, I used the upgraded HPSDR system w/PowerSDR  
for 23cm EME this afternoon during the EU window for the 23cm DUBUS  
EME contest with the HPSDR set serving as a 28 MHz IF for the 1296 MHz  
EME system.   I did not notice any problem with any aspect of the  
software/hardware, but I have tried only one set of software settings  
and board placements at this time.

My board placement is S6:Mercury, S5:Ozy, S2:Excalibur, S1(furthest  
from power connector): Penelope.  The Mercury 122.8 MHz clock is  
selected and the 10 MHz external clock (from Excalibur) is selected in  
PowerSDR.    Only the Mercury board has a "Last JTAG" jumper installed  
during normal operation here (no "Last JTAG jumpers on any other  
board, except when actually updating the firmware for the target  
board, of course).

Nice work, all!

73, Joe K5SO


 1243717805.0