[hpsdr] Fwd: Help getting hermes/anan10 going under linux please

[stephen pearce]

Further to my last post .. here is the terminal output whilst running
QtHPSDRServer
the sequence is .. fire it up .. with QtDSPServer automatically enabled ..
start button  and get audio ..
stop button .. audio goes ..
start button again(with QtHPSDRServer still running as a process)
no audio .. output suggests some problem with QtDSPServer restarting



-- 
Stephen Pearce
Critical Care
Whangarei
ph 021 390 997
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20121208/3b3a0e0f/attachment-0004.htm>
-------------- next part --------------
s at s-HP-Compaq-dc7100-SFF-PK860PA:~/Desktop/An10/Qt/trunk/bin$./QtHPSDRServer 
Alex::set: invalid band: 31 
Alex::getRx: invalid band: 31 
Alex::getRx: invalid band: 31 
Alex::getRx: invalid band: 31 
Alex::getRx: invalid band: 31 
Alex::getRx: invalid band: 31 
Alex::getRx: invalid band: 31 
Alex::getTx: invalid band: 31 
Alex::getTx: invalid band: 31 
Alex::getTx: invalid band: 31 
"eth0" "00:14:C2:CC:DC:1C" "192.168.1.65" 
Interfaces found  1 
Server::set10MhzClock: "Mercury" 
Server::set122_88MHzClock: "Mercury" 
Server::setPreamp: false 
Server::setAlexAttenuation: 0 
Server::configure: init xvtrs 
interface: "eth0" 
after updateInterfaces interface: "eth0" 
Server::bind:  "eth0" : "192.168.1.65" 
Discovery::Discovery 
Server::clearMetis 
start 1 second timeout loop 
Discovery::readyRead 
Server::addMetis 
Discovery::Discovery 
Server::clearMetis 
start 1 second timeout loop 
Discovery::readyRead 
Server::addMetis 
Server::start 
Server::startMetis 
startMetis on interface "eth0" "192.168.1.65" 
startMetis: true 
writeDatagram start command "192.168.1.64" 
Server::start send frames 
Server::start set receiver frequency 
Ozy Software version:  18 
Receiver::dspServerStarted 
QtDspServer- 0 [err]: 
"receiver: 0 
clientPort: 10800 
serverPort: 10600 
host: "127.0.0.1" 
Connection::Connection 
Object::connect: No such slot QObject::setSampleRate(int)
Connection::setConnection:  "127.0.0.1" : 10600 
ClientListener: listening on port: 10800 
I am inside setup
" 
QtDspServer- 0 [err]: 
"setup_threading
" 
QtDspServer- 0 [err]: 
"setup_threading
setup_threading
" 
QtDspServer- 0 [err]: 
"inside reset_for_buflen
" 
QtDspServer- 0 [err]: 
"inside reset_for_buflen
" 
QtDspServer- 0 [err]: 
"DttSP::SetTXOsc:1,0.000000
" 
QtDspServer- 0 [err]: 
"Connection::sendCommand: not connected - appending to waiting!! 
Connection::sendCommand: not connected - appending to waiting!! 
Data:setConnection:  "127.0.0.1" : 10600  local_port: 10700 
" 
QtDspServer- 0 [err]: 
"Connection::sendCommand: not connected - appending to waiting!! 
" 
QtDspServer- 0 [err]: 
"Connection::isConnected 
" 
QtDspServer- 0 [err]: 
"readRead: config.length: 452 
readyRead: config:
"<radio><type>Hermes</type><id>G0ORX</id><version>18</version><samplerate>96000</samplerate><minfrequency>100</minfrequency><maxfrequency>55000000</maxfrequency><receiver><type>Mercury</type><version>0</version><receivers>1</receivers></receiver><control><id>preamp</id><state>false</state></control><control><id>dither</id><state>true</state></control><control><id>random</id><state>true</state></control><exciter><version>0</version></exciter></radio>" 
samplerate: 96000 
" 
"frequency 0 7056000" 
Receiver::start:  "127.0.0.1" : 10700 
Receiver::dspServerError:  1 
Server::stopMetis 
Server::stopMetis metisAddress  "192.168.1.64" 
Server::stopMetis writeDatagram 
Server::start 
Server::startMetis 
startMetis on interface "eth0" "192.168.1.65" 
startMetis: true 
writeDatagram start command "192.168.1.64" 
Server::start send frames 
Server::start set receiver frequency 
QtDspServer- 0 [err]: 
"receiver: 0 
clientPort: 10800 
serverPort: 10600 
host: "127.0.0.1" 
Connection::Connection 
Object::connect: No such slot QObject::setSampleRate(int)
Connection::setConnection:  "127.0.0.1" : 10600 
ClientListener: listening on port: 10800 
I am inside setup
" 
Receiver::dspServerStarted 
QtDspServer- 0 [err]: 
"setup_threading
setup_threading
setup_threading
" 
QtDspServer- 0 [err]: 
"inside reset_for_buflen
inside reset_for_buflen
DttSP::SetTXOsc:1,0.000000
Connection::sendCommand: not connected - appending to waiting!! 
Connection::sendCommand: not connected - appending to waiting!! 
Data:setConnection:  "127.0.0.1" : 10600  local_port: 10700 
Connection::sendCommand: not connected - appending to waiting!! 
Connection::isConnected 
" 
QtDspServer- 0 [err]: 
"readRead: config.length: 452 
readyRead: config:
"<radio><type>Hermes</type><id>G0ORX</id><version>18</version><samplerate>96000</samplerate><minfrequency>100</minfrequency><maxfrequency>55000000</maxfrequency><receiver><type>Mercury</type><version>0</version><receivers>1</receivers></receiver><control><id>preamp</id><state>false</state></control><control><id>dither</id><state>true</state></control><control><id>random</id><state>true</state></control><exciter><version>0</version></exciter></radio>" 
samplerate: 96000 
" 
"frequency 0 7056000" 
Receiver::start:  "127.0.0.1" : 10700 
Receiver::dspServerError:  1 
Server::stopMetis 
Server::stopMetis metisAddress  "192.168.1.64" 
Server::stopMetis writeDatagram 
MainWindow::closeEvent 
Server::stopMetis 
Server::stopMetis metisAddress  "192.168.1.64" 
Server::stopMetis writeDatagram 
s at s-HP-Compaq-dc7100-SFF-PK860PA:~/Desktop/An10/Qt/trunk/bin$