[hpsdr] atlas board

[tom]

completed the install and had two problems with testing.  using the picoPSU- 60-WI power supply i had to connect the on/off switch in order to get it started. next the -5volt led didnot light. couldnot find any reason so used a second powersupply to provide the -5 connected at the test strip. now light lights.  the picture shows the first 5 led's lite with the same power supply so checking there is no -5 on that power supply. then looked for a schematic on the atlas board and have not had luck.  think everything is ok but would like to make sure.
   any link to the schematic ??
tom
w0kgw at citlink.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20060725/ea00b4cd/attachment-0003.htm>