[hpsdr] GIBRALTAR question.

Rick Hambly (W2GPS) w2gps at cnssys.com
Sun Jul 9 17:57:47 PDT 2006


Phil,

I will look at that as a possibility.

Rick
W2GPS
AMSAT LM2232
 

-----Original Message-----
From: pvharman at arach.net.au [mailto:pvharman at arach.net.au] 
Sent: Sunday, July 09, 2006 8:53 PM
To: Rick Hambly (W2GPS)
Cc: peter at gehughes.us; hpsdr at hpsdr.org
Subject: Re: [hpsdr] GIBRALTAR question.

Rick,

It's starting to look like the Horton Local Oscillartor will need a 20MHz 
reference so we can divide it down to 800kHz. Any chance of a this as an 
output from Gibraltar please?

73's Phil....VK6APH 







Quoting "Rick Hambly (W2GPS)" <w2gps at cnssys.com>:

> ***** High Performance Software Defined Radio Discussion List *****
> 
> Peter,
> 
> I will do my best to minimize the customization required. I will try to
> provide an appropriate configuration so that you can feed in your own 10
MHz
> reference or 1PPS signals.
> 
> Rick
> W2GPS
> AMSAT LM2232
>  
> 
> -----Original Message-----
> From: peter at gehughes.us [mailto:peter at gehughes.us] 
> Sent: Saturday, July 08, 2006 3:46 PM
> To: Rick Hambly (W2GPS)
> Cc: hpsdr at hpsdr.org
> Subject: RE: [hpsdr] GIBRALTAR question.
> 
> Hi Rick,
> Thanks for the reply.
> I suspect that for me, and others, there will be many tradeoffs..between
> what we already have, can easily get or have to put on our wishlist..
> 
> For my first unit I already have a GPS disciplined Rhubidium. SO I
> suspect that I will be making liberal use of my Xacto to "Customize" my
> GIBRALTAR..maybe by the end I will be able to build a "Stock"
> version....
> And anything I cut can always be repaired..
> 
> Well this is supposed to be for fun....   :-)
> 
> Peter Hughes
> N7BMG
> 
> > -------- Original Message --------
> > Subject: RE: [hpsdr]  GIBRALTAR question.
> > From: "Rick Hambly (W2GPS)" <w2gps at cnssys.com>
> > Date: Sat, July 08, 2006 1:21 pm
> > To: <peter at gehughes.us>
> > Cc: <hpsdr at hpsdr.org>
> > 
> > Peter,
> > 
> > The external 1PPS and 10MHz suggest a design like the Reflock II, which
is
> > not what I am planning for the initial version of the GIBRALTAR. I am
> > thinking about doing more than one version, however.
> > 
> > My current layout has footprints for the M12+(T)/M12M(T) and for the
> > Resolution-T only.  I could also put the VP/UT+ footprint if people
really
> > want it but I was not too excited about legacy 8-channel receivers.
> > 
> > Yes, there must be an antenna jack. Since every receiver uses a
different
> > connector, I will probably use a standard SMA (or SMB) for the antenna.
> > 
> > Rick
> > W2GPS
> > AMSAT LM2232
> >  
> > 
> > -----Original Message-----
> > From: peter at gehughes.us [mailto:peter at gehughes.us] 
> > Sent: Thursday, July 06, 2006 5:57 PM
> > To: Rick Hambly (W2GPS)
> > Cc: hpsdr at hpsdr.org
> > Subject: [hpsdr] GIBRALTAR question.
> > 
> > Rick,
> > 
> > Since I am not sure if it ever got past the suggestion part
> > I'd like to see an external input on GIBRALTAR for 1PPS and 10 MHZ.
> > AND will there be room to mount alternate GPS receivers like the
> > Motorola ONCORE (left over from TAC)?
> > And finally does the presence of an onboard GPS imply the presence of an
> > antenna jack?
> > 
> > Thanks,
> > Peter Hughes
> > N7BMG
> > > -------- Original Message --------
> > > Subject: Re: [hpsdr] CASMIR design coming out tomorrow and GIBRALTAR
> > > LOgeneration question.
> > > From: "Rick Hambly (W2GPS)" <w2gps at cnssys.com>
> > > Date: Thu, July 06, 2006 4:51 pm
> > > To: "'Alex'" <harvilchuck at yahoo.com>
> > > Cc: hpsdr at hpsdr.org
> > > 
> > > ***** High Performance Software Defined Radio Discussion List *****
> > > 
> > > Alex,
> > > 
> > > My initial plan is to provide only 10MHz and 1pps outputs from
> GIBRALTAR.
> > > They would be 50 Ohm outputs on SMA connectors. The number of such
> outputs
> > > is TBD.
> > > 
> > > I have much of the initial design done. I have been delayed by a trip
to
> > San
> > > Diego for the AMSAT Digital Transponder Design Meeting and the Naval
> > > Academy's MidStar-1 satellite that I am also working on.
> > > 
> > > Rick
> > > W2GPS
> > > AMSAT LM2232
> > >  
> > > 
> > > -----Original Message-----
> > > From: hpsdr-bounces at hpsdr.org [mailto:hpsdr-bounces at hpsdr.org] On
Behalf
> > Of
> > > Alex
> > > Sent: Tuesday, July 04, 2006 8:48 PM
> > > To: hpsdr at hpsdr.org
> > > Subject: [hpsdr] CASMIR design coming out tomorrow and GIBRALTAR
> > > LOgeneration question.
> > > 
> > > ***** High Performance Software Defined Radio Discussion List *****
> > > 
> > > I'll have a low-level design out on CASMIR tomorrow. It's a KISS
design
> > > based off of JANUS with a few cheeky twists. 
> > > I had been trying for something elegant, but the idea didn't pan out.
Oh
> > > well.
> > > 
> > > Still looking for the answer on LO distribution from GIBRALTAR. I'm
not
> > > putting a LO on CASMIR, so I need the LO from GIBRALTAR (or
elsewhere). 
> > > Will LO distribution be differential or single ended LVDS? 
> > > 
> > > Alex, N3NP
> > > 
> > > 
> > > _______________________________________________
> > > HPSDR Discussion List
> > > To post msg: hpsdr at hpsdr.org
> > > Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> > > HPSDR web page: http://hpsdr.org
> > > Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/
> > > 
> > > _______________________________________________
> > > HPSDR Discussion List
> > > To post msg: hpsdr at hpsdr.org
> > > Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> > > HPSDR web page: http://hpsdr.org
> > > Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at hpsdr.org
> Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> HPSDR web page: http://hpsdr.org
> Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/
> 




 1152493067.0


More information about the Hpsdr mailing list