[hpsdr] Some thoughts on plug-in board layout

[Lyle Johnson]

>> Given the above, I locate pin A1 of the 96-pin DIN connector at location
>>   (-18,4mm, 5.3mm) or  (-0.725", 0.210").
>>
>> Steve, Phil, do you concur that this location will work?
> 
> I came up with -30.6, 5.3 mm.  See drawing posted in other message...I
> could be wrong...notice where my datum is...no time to update datum
> now...gotta run...

OK, I see where I was doing things differently.  You've essentially put 
the extra 20mm on the IO connector side of the PCB.  I will do the same, 
then get the board re-layout completed.

73,

Lyle KK7P



 1148663814.0