[hpsdr] Flex - Radio 5000 series and SDR - 1000

[Eric Ellison]

PaulaO/All

I apologize if my message did leave that impression, it was not intended to
do that. As you can see Phil and Lyle have already responded.

Janus/Ozy are designed so that the combination will work directly with the
SDR-1000. Code written my Bill KD5TFD, and tested by the alpah1 and 2
testers have used it to control the SDR-1000. I know that a number of people
have asked, or mentioned on Teamspeak that they were planning to purchase
SDR-1000 to use with Janus and Ozy. I would say most folks have purchased
Janus/Ozy for this initial use, with out SDR-1000s.

My conversation with John at Flex, just confirmed that they would no longer
be manufacturing SDR-1000's and there were a limited quantity left. Also
that they would be doing what would be required to support Janus/Ozy in
their official release code of PowerSDR. If your intended use of Janus/Ozy
combo was for use with SDR-1000 and you don't have an SDR-1000 at this
point, you have a limited time to buy, before they 'run out'.

Sorry for any confusion.
Thanks
Eric




-----Original Message-----
From: hpsdr-bounces at hpsdr.org [mailto:hpsdr-bounces at hpsdr.org] On Behalf Of
KG4VPY
Sent: Friday, April 06, 2007 12:04 PM
To: 'HPSDR Group'
Subject: Re: [hpsdr] Flex - Radio 5000 series and SDR - 1000

***** High Performance Software Defined Radio Discussion List *****

I'm confused.

Is this project this list is working on dependent on the SDR 1000?

Or is it the Janus and Ozy boards can be used with them in the meantime?

In other words, in the end, when this project is done, will I still need 
the SDR 1000?

PaulaO
KG4VPY

Eric Ellison wrote:
>
> Folks
>
> I just got off the phone with John Basilotto Marketing manager with 
> FlexRadio Systems. With the introduction of their new SDR-5000 series 
> of transceivers they will be discontinuing production of the SDR-1000 
> Transceiver.
>
> http://www.flex-radio.com/
>
> John says that they do have a limited number of SDR-1000's still 
> available, and gave me a heads up for those of you contemplating using 
> Janus/Ozy to get your orders in ASAP if you do not have an SDR-1000. 
> You can contact John at FlexRadio if you need help, or order from the 
> FlexRadio Systems website.
>
> FlexRadio Systems will continute to support SDR-1000 in PowerSDR 
> coding and will fully support the Janus/Ozy. Integrating the Janus/Ozy 
> into the supported PowerSDR code versions will be on their list of 
> priorities sometime after Dayton. Of course we in the HPSDR community 
> will need to provide the hardware support for Janus/Ozy.
>
> Thanks
>
> Eric - AA4SW
>
>
_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at hpsdr.org
Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
HPSDR web page: http://hpsdr.org
Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/


 1175879822.0