[hpsdr] EEPROM Programming

[Phil Harman]

During the production of Ozy we need to program some 500 24LC128 EEPROMS. 
This EEPROM is use to hold the USB  VID and PID of the Ozy board.

There is a facility to program the blank chip after it has been assembled on 
the PCB and this is the process we used when building the prototypes. 
However, this is rather a time consuming process ( when it has to be done 
500 times!) and what would be ideal would be to install these chips ready 
programmed.

Phil N8VB suggested that we use a jig to hold the chip and program them via 
I2C. Has anyone built such a jig, knows how to make one, or knows if it 
possible to order them ready programmed.

73's Phil...VK6APH



 1172232558.0