[hpsdr] another Ozy built - write_i2cV1.1 errors

[Bill Tracey]

You're correct that the wirte_i2c bits are going to fail if Janus is 
not present -- in this case, initozy is a bit of a misnomer.

The i2c writes are actually for the TLV320AIC23B  -- the AK5394A is 
not i2c controlled.

Congratulations on getting the Ozy built.

Regards,

Bill (kd5tfd)


At 06:23 AM 7/15/2007, Ramakrishnan Muthukrishnan wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>On 7/15/07, Ramakrishnan Muthukrishnan <vu3rdd at gmail.com> wrote:
> >
> > But when I run initozy11.bat, I get write_i2cV1.1 errors. None of
> > those seven writes are happening. It says write failed. No popups
>
>Oh.. it looks like 0x1A is the adress of AK5394A codec. So no wonder
>the following lines fail in my setup.
>
>write_i2cV1.1 0xfffe 0x7 0x1a  0x2  0x1e 0x00
>write_i2cV1.1 0xfffe 0x7 0x1a  0x2  0x12 0x01
>write_i2cV1.1 0xfffe 0x7 0x1a  0x2  0x08 0x15
>write_i2cV1.1 0xfffe 0x7 0x1a  0x2  0x0c 0x00
>write_i2cV1.1 0xfffe 0x7 0x1a  0x2  0x0e 0x02
>write_i2cV1.1 0xfffe 0x7 0x1a  0x2  0x10 0x00
>write_i2cV1.1 0xfffe 0x7 0x1a  0x2  0x0a 0x00
>
>--
>   Ramakrishnan - VU3RDD



 1184506054.0