[hpsdr] A/J/O-SDR1k, Beta 1.9.1 SVN:1320

[Richard Smith]

John,

I've taken your CW connection tip, but still can't get good keying from the 
SDR-1000.  The first dit is often extended to a dah, and vice versa.  Any 
other thoughts on how to get the SDR keyer to work cleanly?  Thanks.

73,

Rich W1EZ
----- Original Message ----- 
From: <n3wt at comcast.net>
To: <hpsdr at hpsdr.org>
Sent: Thursday, July 05, 2007 9:53 AM
Subject: Re: [hpsdr] A/J/O-SDR1k, Beta 1.9.1 SVN:1320


> ***** High Performance Software Defined Radio Discussion List *****
>
> SDR-1000 with full control via A./J/O now operates fine here also with SVN 
> 1320.   Also, no  errors with the new intozy11.bat .     Good so far and 
> smooth fast control of PowerSDR with Ozy.
>
>   A tip:    for CW, connect the paddle direct to the Ozy board.  With 
> paddle connected to rear of SDR-1000 and  the A/J/O system, I had somewhat 
> choppy CW on the break-in turnover.  However, with the paddle connected 
> direct to the Ozy,   the CW is fine.   "Almost " full QSK if I wanted. 
> This was confirmed while using dummy load and separate receiver as 
> monitor.     Before Ozy, it did not seem to make a difference if paddle 
> connected to the Flex box or the PC serial.  Now,  best if paddle 
> connected direct to Ozy.
>
> 73,  John  N3WT
>
>
> -------------- Original message ----------------------
> From: hartfuss <hartfuss at ipp.mpg.de>
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> thanks, after a complete new download all works fine, both with
>> v1.6.3 SVN: 701 and with 1.9.1 SVN: 1320 as well.
>> Best 73, Hans, DL2MDQ.
>>
>>
>>
>>
>> hartfuss schrieb:
>> > Hi all,
>> > SDR-1000 works fine with Atlas/Janus/Ozy control and KD5TFD's 6 June
>> > version of v1.6.3 (SVN: 701).
>> > I just downloaded PowerSDR Beta v1.9.1 SVN: 1320 to make use of all the
>> > improvements included sice.
>> > However, while RECEIVE works well, TRANSMIT is not possible. MOX works,
>> > relays are clicking, but there seems to be no audio input (Panadapter:
>> > -130).
>> > What have I forgotten?
>> > Thanks and 73s, Hans, DL2MDQ.
>> >
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at hpsdr.org
>> Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
>> HPSDR web page: http://hpsdr.org
>> Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at hpsdr.org
> Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> HPSDR web page: http://hpsdr.org
> Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/ 


 1184543028.0