[hpsdr] Atlas_Lite...

[Hollingsworth, Tommy]

 Barry:
Did you realize that you can mount a vertical DIN connector on the ozy
facing backwards and a vertical DIN connector on the Janus facing forward
and connect the two boards with no Atlas at all.  I tried it and it works!
The 3M Male DIN part number is DIN-96RPC-S1-TR+DIN/96P?    30048011402872

Before doing any soldering position the two connectors and get the keying
correct.  Get it backwards and it will be hard to undo.  This will create a
non standard configuration but it will still plug into an extender card.
Has anyone else tried this or just me?]
Tommy KE5LFR

-----Original Message-----
From: hpsdr-bounces at hpsdr.org [mailto:hpsdr-bounces at hpsdr.org] On Behalf Of
Barry Jablonski
Sent: Wednesday, March 14, 2007 1:27 AM
To: hpsdr at hpsdr.org
Subject: [hpsdr] Atlas_Lite...

***** High Performance Software Defined Radio Discussion List *****

Hi Eric,

I've been a lurker on this group for quite a while now.  After I saw some
comments on cutting the Atlas backplane at slot 2 to provide for an
interconnect for just a Janus/Ozy pair, I decided that there was something
better.  I started with the free stuff (ExpressPCB, PCB123...).  But they
all had limitations.  I decided to purchase a non-profit license for
DipTrace (4layers/1000pins).  I have taken Phil C's excellent Atlas design
and have converted it to a 2 slot design, that may be of interest to the
JANUS/OZY only folks.

Is anyone interested?

Barry
WB2ZXJ

_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at hpsdr.org
Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
HPSDR web page: http://hpsdr.org
Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/

 1173878254.0