[hpsdr] Lessons learned

[Terry Fox]

The power supply I just bought had a 24-pin connector, but the 4 extra pins
are a separate connector that locks into the larger 20-pin one.  I think the
last one I bought a few months ago did the same thing.

All you need to do is remove the tape connecting the two connectors, and
unlock them from each other.
Terry

----- Original Message ----- 
From: "Tony Langdon" <vk3jed at gmail.com>
To: "Tom Homsley" <tom_homsley at msn.com>; <hpsdr at hpsdr.org>
Sent: Thursday, May 24, 2007 5:14 PM
Subject: Re: [hpsdr] Lessons learned


> ***** High Performance Software Defined Radio Discussion List *****
>
> At 04:29 AM 5/25/2007, Tom Homsley wrote:
>
> >Make sure you get a PSU with a 20-pin connector.  Some of the newer
> >ones have 24 pins.
>
> Converters are readily available, if you happen to have one with 24
> pins.  Not sure if using one of these would have any implications for
> Atlas, but I've certainly used them for powering 20 pin motherboards
> from 24 pin supplies with no hassles.
>
> 73 de VK3JED
> http://vkradio.com
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at hpsdr.org
> Subscription help: http://lists.hpsdr.org/listinfo.cgi/hpsdr-hpsdr.org
> HPSDR web page: http://hpsdr.org
> Archives: http://lists.hpsdr.org/pipermail/hpsdr-hpsdr.org/
>


 1180045636.0