[hpsdr] Mercury - Extended Frequency Range above 65MHz

[Gerd Loch]

Hi Bill,

thanks in advance.

I found out that you can now go to higher frequencies above 65 MHz when you
enable XVTR and select VHF in bandselect. Probably the code for the
frequency should be correct when you select offset=0 in the XVTR table.

Could you please check it? 
This would be a preliminary workaround for me.

73, Gerd



-----Original Message-----
From: Bill Tracey [mailto:bill at ewjt.com] 
Sent: Thursday, February 12, 2009 6:49 AM
To: g.loch at nt-electronics.de; hpsdr at lists.hpsdr.org
Subject: Re: [hpsdr] Mercury - Extended Frequency Range above 65MHz

Probably need some mods to the code to move the limit.     Guess I 
could pull the limit into the HPSDR setup page.  Will add it to the 
to do list.

Bill (kd5tfd)


At 10:08 AM 2/11/2009, Gerd Loch wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>I have running Mercury-EU with a sampling frequency of 184,32MHz and want
to
>use the frequency range up to 92 MHz. Now the upper limit in PowerSDR is
set
>to 65MHz.
>
>What is to be done to extend the upper frequency limit to something higher
>than 65 MHz?
>
>Gerd, DJ8AY




 1234426949.0