[hpsdr] No power output for Transverters - now fixed

[Bill Tracey]

Yeah - was wondering if anyone would notice that.  What's happening 
is when going to the transverter the gain from the gain by band table 
is not being applied.  So much for getting away with the quick 
fix!  I'll add getting full power for the transverter on to the list.

Cheers,

Bill  (kd5tfd)

At 10:24 PM 2/26/2009, g4fre at g4fre.com wrote:
>The good news is that I now see output from penny when a transverter is
>setup and selected
>
>There does however seem to be a difference between the penny output power
>when 10m is selected and when 10m as a transverter is selected
>
>with power=100% txgain=38.0, cw, tune i get
>
>powersdr        power meter
>
>393mw           413mw
>
>
>with a band built as 432, l.o. =404 power =100%, cw tune i get
>
>powersdr        power meter
>
>330mW           360mW
>
>which is around 20% different (ie 20% lower when transverter is selected
>than when 10m is selected)
>
>Dave
>
>ww2r



 1235710017.0