[hpsdr] No power output for Transverters - now fixed

[Bill Tracey]

OK -- transverters are now using the gain by band table correctly, so 
you should not see a poer difference on 10m via xvtr and 10m directly.
SVN >= 2722 
from: 
svn://206.216.146.154/svn/repos_sdr_windows/PowerSDR/branches/kd5tfd/PennyMerge/bin/Release

Regards,

Bill

At 10:24 PM 2/26/2009, g4fre at g4fre.com wrote:
>The good news is that I now see output from penny when a transverter is
>setup and selected
>
>There does however seem to be a difference between the penny output power
>when 10m is selected and when 10m as a transverter is selected
>
>with power=100% txgain=38.0, cw, tune i get
>
>powersdr        power meter
>
>393mw           413mw
>
>
>with a band built as 432, l.o. =404 power =100%, cw tune i get
>
>powersdr        power meter
>
>330mW           360mW
>
>which is around 20% different (ie 20% lower when transverter is selected
>than when 10m is selected)
>
>Dave
>
>ww2r



 1235879961.0