[hpsdr] Problem with Mercury V2: not

[Mark Amos]

Bill, Graham,

Thank you both very much for your quick replies and suggestions. The problem appears to have been caused by 
leaving the programming cable plugged in. Each time I changed bands, some kind of transient occurred that 
caused the odd behavior.  

It started happening immediately after I loaded the new code (hence the programmer being plugged in...) 

Bill, I'm using an external keyer (hooked up to a physical com port) and CWSend hooked up to a virtual com port 
(both working OK - but with some delay.) I'll move these to Ozy at some point.

Graham, I am indeed running V2.1. It seems to be working great now...

Thanks again for the quick replies!

And, to the list, sorry for the noise.  I hope my mistake can help keep someone else from having this problem!

Mark
W8XR


>Mark,
>
>Check your keyer setting in setuip->DSP->Keyer.  It should be set to Ozy and not SDR.
>
>If it is set to SDR can you tell me the Date in the titlebar .. I think I've fixed >this in 30Dec and greater 
releases, but it could be it's not as fixed as I thought it >was.
>
>Regards,
>
>Bill  (kd5tfd)
>
>-----Original Message-----
>From: Graham / KE9H [mailto:KE9H at austin.rr.com] 
>Sent: Wednesday, December 31, 2008 10:17 PM
>To: Mark Amos
>Cc: hpsdr at lists.hpsdr.org
>Subject: Re: [hpsdr] Problem with Mercury V2
>
>Mark:
>
>Are you running V2, or the V2.1 that Phil released yesterday?
>
>I had multiple problems with V2, but 2.1 is much, much cleaner,
>If you have not updated to 2.1, I suggest you do so and re-test.
>
>--- Graham / KE9H
>