[hpsdr] PowerSDR, A/J/O and 3-board SDR-1000

[K1rqg at aol.com]

Terry
 
Try this SVN release:  
svn://206.216.146.154/svn/repos_sdr_windows/PowerSDR/branches/k6jca/bin/Release
I used it for a long time with the configuration you describe and was very  
pleased with it. I just checked and
it is still there.
 
73 de Joe
K1RQG

 
In a message dated 1/3/2009 3:10:51 A.M. Eastern Standard Time,  
tfox at knology.net writes:

*****  High Performance Software Defined Radio Discussion List *****

I am  finally upgrading my SDR-1000 system to Atlas/Janus/Ozy.  This is  a
three-board SDR-1000 (no RFE, amp, tuner).  I have been using a Flex  USB
adaptor and an Extigy.  The SDR-1000 was working fine in this  configuration.

I tried loading the newest PowerSDR from the HPSDR svn,  and it doesn't work
right.  I seem to have some control over the radio  (power on/off, MOX, and
something happens when I tune arond), but no RF  signals are present, just
some spurs and a large center hump.  I  cannot even see a large signal from a
signal generator plugged right into  the SDR-1000 antenna.

I seem to recall a message a while back that the  newer versions of PowerSDR
no longer support the three-board  SDR-1000.  Is this correct?  If so, what
is the latest PowerSDR  that still supports this radio, and where can I get
it?

I have a  copy of version 1.10.3, but it does not have the Ozy/Janus support
files,  and won't run with A/J/O.

If I leave everything connected, except for  the SDR1000 I/Q out to Janus IQ
Line In, and connect a SoftRock IQ out to  that Janus port, I can demod
signals from the SoftRock.  So, it  appears that PowerSDR is not commanding
the SDR-1000 hardware  properly.

Thanks for any  pointers.
Terry
WB4JFI




**************Stay up-to-date on the latest news - from fashion trends to 
celebrity break-ups and everything in between. 
(http://www.aol.com/?ncid=emlcntaolcom00000024)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20090103/e123102d/attachment-0003.htm>