[hpsdr] initozy PIPED

[Bill Tracey]

Hulen,

As Phil already mentioned, the I2C writes failing to address 26 would 
be expected in a system w/o Janus.   Writes to address 27 are to the 
TLV320AIC23B codec on  Penelope, so if it's not present we'd expect 
those to fail as well.

One thing that is of interest is you're getting a Result of False, on 
taking the CPU out of reset on the load_firmwareV1.1 call, I get true 
for that on my machine, yet you seem to be able to load the FPGA so 
I'm not quite sure how significant that result of False is.

If you run initozy11.bat from a command line before running PowerSDR, 
do you hear the Windows sound indicating you've inserted a USB 
device?  After the load_firmwareV1.1 call the FX2 on Ozy essentially 
reattaches to the PC, so you should here the USB device inserted 
tone.    Does it sound normal - on my machine I get a different sound 
when Windows can't setup the USB device properly - that would be an 
indication of a problem.

After running initozy11.bat and before running PowerSDR I'd expect 
the Ozy LEDs to be:

D1 - Fast Blink (3-4 hz I'd guess)
D2-4 Off
D5-8 On
D 9 and 10 Alternating
D11 off
D12 on

After you run PowerSDR and turn it on LEDs are typically
D1 Off
D2 On
D3 Off
D4-8 On
D 9 and 10 Alternating
D11 off
D12 on

I assume you're still huniting a no Panadapter Data problem ... if 
you could run from a Command line:

PowerSDR 2>&1 >runlog.txt

And then turn PowerSDR on, leave it for about a minute, turn it off 
and exit.  This will create a file runlog.txt that I'd be interested 
to see.   Also would like to know what version of Window's you're running.

Cheers,

Bill (kd5tfd)

At 04:02 PM 1/5/2009, Hulen Smith wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
>Here's my problem, who can help?
>
>C:\Program Files\FlexRadio Systems\PowerSDR\Release>load_firmwareV1.1 0xfffe
>0x0007 ozyfw-sdr1k.hex
>finding busses...
>finding devices...
>usb_get_busses...
>bus location: 0
>Checking for VID PID...
>Found VID PID: fffe 7
>Trying to open device...
>Device handle is: 3499968
>Resetting CPU...Reset ON...
>Result: True
>Opening intel hex file: ozyfw-sdr1k.hex
>Processed 740 lines...
>Result: True
>Taking CPU out of reset...
>Result: False
>Closing device...
>done...
>
>FPGA = SUCCESS
>
>further down
>
>
>C:\Program Files\FlexRadio Systems\PowerSDR\Release>write_i2c 0xfffe 0x7
>0x1a 0x1e 0x00 0x00 2
>finding busses...
>finding devices...
>usb_get_busses...
>bus location: 0
>Checking for VID PID...
>Found VID PID: fffe 7
>Trying to open device...
>Device handle is: 3489664
>Failed to write address: 26
>Closing device...
>done...
>
>INITOZY11 results are the same. Looks like CPU isn't resetting. Clues
>anyone?
>Thanks for any help.



 1231205449.0