[hpsdr] Problem with Mercury

[Brian Crighton]

Hi All
I have found the reason for not programing Mercury.
I completely forgot that my main disk drive is using letter H and I did not change it in the 
program-mercury-EPCS16.bat file, what an idiot.

So sorry to ask before thinking properly.

I am now going to see if I can get Mercury Penny Ozy working now.

Hope I do not need to post again.
Thanks to all for help, what a great team.
Kind
Regards
Brian Crighton.

Hello Brian,

When you want to update Mercury, you must have Ozy just in the next slot 
(no gap beetween the two)

In the device manager, I think it is normal to see OZY Host  Assisted 
Firmware, an then when you run program-mercury-EPCS16.bat, the good soft 
is loaded in Ozy that make it appears as a usb-blaster.

You can also verify, just before entering your choice (say E for 2.4), 
you should see the Altera usb blaster in the device manager.
If not, there is a problem with Ozy?

73, Roland f8chk.

Brian Crighton a écrit :
> ***** High Performance Software Defined Radio Discussion List *****
>
>   
>
> ------------------------------------------------------------------------
>
> Hi All,
>  
> Thanks Phil for your help and everybody else's, but I am still in 
> trouble, I have followed the instruction to the letter
> to update Mercury but it fails.
>  
> What happens is I get as far as to enter what version of code to load, 
> say E for 2.4 and all that happens is that it says
> The Device is not ready
> Press any key to continue. (Version 2.4 etc is there). 
> All loading to that point shows no errors.
>  
> Then nothing happens apart from coming out of the program.
>  
> If I look in device manager after loading usb blaster drivers it is 
> shown as there Altera USB-Blaster in universal serial Busses.
> but when I look in device manager after powering off and adding 
> Mercury I only see the OZY Host Assisted Firmware Load  
> Altera usb-blaster is not there.
>  
> Is this my problem - I am lost what to do.
>  
> Can anybody help me please as I am nearly bald!
>  
> Regards
>  
> Brian Crighton.
>  
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20090111/4588f502/attachment-0003.htm>