[hpsdr] PTT and CW with Penelope

[Bill Tracey]

Yup.... this is a glitch.  We've got PTT and DOT overloaded as the 
same signal.  Will change it in a future firmware and PowerSDR 
release to make DOT and PTT independent signals - then we'll be able 
to do what people are expecting.

Regards,

Bill


At 01:25 PM 6/21/2009, Roger Rehr wrote:
>***** High Performance Software Defined Radio Discussion List *****
>
><...snip...>
>
>My point is just that the PTT connection on Penelope does not work as
>it should in CW mode, at least for me, and unless I am doing something
>wrong, others will be adversely affected when they go to use the PTT
>connection on Penelope for PTT in CW mode.  Since the PTT on Penelope
>works fine in voice modes, and since it works in CW mode with other
>PowerSDR/hardware configurations it would seem to possibly be a
>software or firmware error that may be correctable.  While the Ozy
>connection is a 'work-around', it would be nice to be able to use the
>PTT connector on Penelope as one would expect to be able to use it.
>
><...snip...>
>Thanks again,
>
>Roger Rehr
>W3SZ
>http://www.nitehawk.com/w3sz/osxhpsdrserver.htm



 1245818958.0