[hpsdr] Gigabit Ethernet Switch Options?...

[John Melton]

I bought an additional network card Netgear GA311 (eth1) and have
connected Metis directly to it so that I could keep the network traffic
separate. The motherboard ethernet (eth0) is then just used for general
lan and internet use.  Both are 10/100/1000 comapatable.  The GA311 cost
me £8.99!

-- John g0orx/n6lyt


On Mon, 2010-11-15 at 15:17 +0100, Henk Remijn PA5KT wrote:
> ***** High Performance Software Defined Radio Discussion List *****
> 
> I am planning to use a crossover cable between pc and the Metis, but 
> that was not your question.
> 
> I have good experience with the HP Procurve 1810G-8.
> Good throughput and manageble.
> 
> http://h10144.www1.hp.com/products/switches/HP_ProCurve_1810G_Switch_Series/overview.htm
> 
> 73 Henk PA5KT
> 
> Op 14-11-2010 23:56, n3evl schreef:
> > ***** High Performance Software Defined Radio Discussion List *****
> >
> > With Metis soon to be available, I was wondering about any 
> > recommendations for ethernet swtiches.
> >
> > My PC is equipped with a gigabit Ethernet card (Intel 82566dc-2) but 
> > the switch I use in the shack for this PC and another laptop is only 
> > 10/100 (Netgear DS108).
> >
> > Does anyone have recommendations for gigabit switches?
> >
> > Thanks,
> >
> > Pete, N3EVL
> > _______________________________________________
> > HPSDR Discussion List
> > To post msg: hpsdr at openhpsdr.org
> > Subscription help: 
> > http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> > HPSDR web page: http://openhpsdr.org
> > Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
> >
> 
> 



 1289837023.0