[hpsdr] Metis Arrived & Works!

[Dan Mitchell]

My Metis works well when connected directly to my computer, and runs well in
PowerSDR. However, when connected thru my 4-port router, it fails to be
assigned an IP address by the DHCP in the router. The router sees the MAC
address of the Metis for a period, but does not assign the IP address.
Suggestions?
Dan, W0IQ

-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Phil Harman
Sent: Wednesday, February 16, 2011 5:17 PM
To: Gordon & Lois Duff
Cc: hpsdr at lists.openhpsdr.org
Subject: Re: [hpsdr] Metis Arrived & Works!

***** High Performance Software Defined Radio Discussion List *****

Hi Gordon,

Glad to hear that Metis is working well for you. I've yet to implement the
"Full Spectrum" display in KK but will do shortly.

I'll add this to the next release that will also support PennyLane.

As Jeremy mentioned, Metis comes ready programmed with V1.0 so no need to
re-program it unless you want to experiment with John's HPSDR Programmer
application.

One thing the Beta testers found was that the CPU load running PowerSDR
with Metis compared with Ozy/Magister was significantly lower.

I'd be interested in your findings.

73 Phil...VK6APH


> ***** High Performance Software Defined Radio Discussion List *****
>
> Thanks to Phil and TAPR and all who contributed.  It is a great bunch of
> people, all helpful to a fault.
>
>
>
> Sort of a quick start guide.  I think these are the appropriate steps
> (they
> are in the manual, of course)
>
>
>
> 1.   Download the HPSDRProgrammer (see the Openhpsr.org downloads section
>
> 2.   If you are a windows user also download Winpcap as noted under
> HPSDRProgrammer section
>
> 3.   Download the Metis_V1.0.rbf ( as shown just below the HPSDRProgrammer
> info)
>
> 4.   Install the board with the appropriate jumper (J2).  J2 was installed
> by TAPR in my case.
>
> 5.   Run HPSDRProgrammer - a) discover (makes sure you are connected) and
> b)
> Program to load Metis rbf
>
> 6.  Start KISS Konsole - Ethernet version and away you go.  (I have not
> tested PowerSDR yet)
>
>
>
> KISS seems to work fine.  However,  "Full Spectrum" does not seem to be
> implemented.
>
>
>
> Thanks again to all.
>
>
>
> Gordon, KA2NLM
>
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


 1297920490.0