[hpsdr] Penny FPGA Load

[John Melton]

Hi Gordon,

you should just be able to just try it again.

Can you confirm that the Metis board was in the slot farthest from the
power connector (J1) and that the Penelope card was in the slot next to
it (J2)?  You also need to have the Last JTAG jumper on the Penelope
card.  There should be no other cards on the ATLAS bus.  (All as per the
Metis User Manual).

Can you also let me know what OS and version you are running?

The only way I have managed to make this fail is to not have the boards
in the correct slots.

Regards,

John g0orx/n6lyt



On Wed, 2011-07-13 at 09:15 -0400, Gordon & Lois Duff wrote:
> ***** High Performance Software Defined Radio Discussion List *****
> 
> About a week ago I reported:
> 
>  
> 
> "I tried to upgrade to version 1.3 unsuccessfully.
> 
>  
> 
> I used HPSDRProgrammer version 1.4 and got a clean report.  Right
> after the
> 
> load Penny LEDs 1,2,5 and 6 were on solid.  3 and 4 were off, and 7
> was
> 
> flashing.  
> 
>  
> 
> I powered everything off,  removed J1 from Metis and turned the power
> back
> 
> on.  Now only LED 1 is on on the Penny board.
> 
>  
> 
> What can I try next?"
> 
>  
> 
> I have not yet solved the problem.  Do I need to buy another Penny?
> (Ouch).  Maybe I won't need Alex after all :)
> 
>  
> 
> Hopefully, someone on the list can get me going again.
> 
>  
> 
> Gordon, KA2NLM
> 
>  
> 
>  
> 
>  
> 
> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



 1310576278.0