[hpsdr] Addendum: Pennylane vs. Penelope

[wully]

Hi all

Question 2 is answered: the schematics pdf contains rev B. Only the link 
on the home page states rev A.

I assume, that the FPGA code is the same as for penelope?

Sorry
73, Alfred



-------- Original Message --------
Subject: 	Pennylane vs. Penelope
Date: 	Wed, 29 Jun 2011 10:47:04 +0200
From: 	wully <wully at bluewin.ch>
To: 	hpsdr at lists.openhpsdr.org



Hi all

I just received the pennylane board from IQuadlabs.

1) When just plugging in the pennylane board together with metis for a
quick test (but NO mercury because of not enough power for both), I
notice that LED 7 is blinking, whereas on Penny it is steady. What makes
the difference? LED1 is steady on on both boards.

2) On the pennylane, the revision states "Rev B" but the published
schematics at openhpsdr.org are "Rev A"
What is the difference?


73

Alfred, HB9EPU

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20110629/df1ba281/attachment-0002.htm>