[hpsdr] Metis - what am I doing wrong?!

Chris Smith chris at vspl.co.uk
Fri Mar 11 05:42:58 PST 2011 

Hi Berndt

Now you have me worried. I just did an SVN update on the PowerSDR folder and nothing newer than the version I'm running was downloaded. So where are the versions you mention?

Cheers

Chris

On 11 Mar 2011, at 13:09, Berndt Josef Wulf wrote:

> ***** High Performance Software Defined Radio Discussion List *****
> 
> G'day Chris,
> 
> have you tried with a later version of PowerSDR? I've been successful in using 
> PowerSDR 1.16.3 and PowerSDR 1.19.3 and Metis V1.1
> 
> cheerio Berndt
> 
> On 11/03/11 Chris Smith wrote:
>> ***** High Performance Software Defined Radio Discussion List *****
>> 
>> Hi John
>> 
>> I haven't downloaded WireShark yet but in answer to your question: there is 
> only one NIC on the PC and the port on the switch that this connects to shows 
> a 10Base1000 connection.
>> 
>> A clarification: D20 LED(9) only comes on when Metis responds to a discovery 
> packet from either HPSDRProgrammer or PowerSDR otherwise it remains OFF after 
> a power cycle.
>> 
>> I'm off to the shack again to run WireShark though I feel that the behaviour 
> of D20 indicates that PowerSDR and Metis are talking to each other at least in 
> the discovery phase. It appears to be after that that things go wrong.
>> 
>> Cheers & 73
>> 
>> Chris G4NUX
>> 
>> 
>> On 11 Mar 2011, at 12:44, John Melton wrote:
>> 
>>> Hi Chris,
>>> 
>>> everything sounds OK with Metis and DHCP and HPSDRProgrammer.
>>> 
>>> I do not use PowerSDR so cannot comment on it, but you could try running
>>> WireShark to capture the packets. You should see PowerSDR send a
>>> discovery packet (to address 255.255.255.255) and then see a response
>>> from Metis.  As HPSDRProgrammer is working you could also watch this
>>> with WireShark as well.
>>> 
>>> Do you have more than 1 network interface on the PC?
>>> 
>>> -- John g0orx/n6lyt
>>> 
>>> 
>>> On Fri, 2011-03-11 at 12:07 +0000, Chris Smith wrote:
>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>> 
>>>> Hmmm...
>>>> 
>>>> Having shaken off Montezuma, at least to the extent that I feel safe 
> disappearing down the garden to my shack, I installed Metis and a new Netgear 
> GS105 5 port gigabit switch. Installation is as per Figure 2 on page 5 of 
> Metis user manual.
>>>> 
>>>> On power up of the hardware Metis appears to get an IP address from my 
> DHCP server and the LEDs settle down to:
>>>> 
>>>> 14	Slow flash
>>>> 15	Occasional/random flash
>>>> 16	-
>>>> 17	Occasional/random flash
>>>> 22	-
>>>> 12	-
>>>> 11	ON
>>>> 13	-
>>>> 21	-
>>>> 20	ON
>>>> 19	-
>>>> 18	-
>>>> 23	2Hz flash (heart-beat?)
>>>> 
>>>> John's HPSDRProgrammer is able to discover Metis and shows me a MAC 
> address and the IP address supplied by my DHCP server - IP is in the correct 
> range.
>>>> 
>>>> So far so good. I ran PowerSDR (KD5TFD 2Feb2011b) and selected Connection 
> Type Metis (Ethernet) in Setup and Apply but the Metis Address IP & MAC 
> addresses both remain steadfastly at all zeros.
>>>> 
>>>> I dismissed PowerSDR and cycled power on the hardware (later I even 
> restarted WinXP) but on starting up PowerSDR again the Metis Address still 
> shows all zeros and trying to Start PowerSDR gets me, after a several second 
> delay, a message to the effect that HPSDR hardware was not detected and was it 
> connected and powered on? PowerSDR also shows all the installed boards as 
> having version zero installed.
>>>> 
>>>> Wondering if I needed Metis_V1.1 I successfully ran HPSDRProgrammer and 
> installed V1.1 though I haven't been able to verify that that is what is 
> loaded on Metis.
>>>> 
>>>> I've read and re-read the Metis user manual until I can almost recite it 
> verbatim but can't see what I might be doing wrong.
>>>> 
>>>> It appears that although HPSDRProgrammer can see Metis PowerSDR can't.
>>>> 
>>>> Help - please!
>>>> 
>>>> Cheers & 73
>>>> 
>>>> Chris G4NUX
>>>> 
>>>> On 11 Mar 2011, at 08:05, Chris Smith wrote:
>>>> 
>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>> 
>>>>> Parcelforce were as good as their word and Metis arrived safely 
> yesterday. Unfortunately I've been struck down with Montezuma's Revenge for 
> the past couple of days so have be able to do nothing but look longingly at 
> the unopened anti-static bag.  :-)
>>>>> 
>>>>> Cheers & 73
>>>>> 
>>>>> Chris G4NUX
>>>>> 
>>>>> On 10 Mar 2011, at 23:26, Paul Fletcher wrote:
>>>>> 
>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>> 
>>>>>> Mine is awaiting payment of duty so it's in the UK somewhere.
>>>>>> 
>>>>>> ----- Original Message ----- From: "Steven Doyle" 
> <steve_doyle at o2.co.uk>
>>>>>> To: <hpsdr at lists.openhpsdr.org>
>>>>>> Sent: Thursday, March 10, 2011 9:24 PM
>>>>>> Subject: Re: [hpsdr] Metis
>>>>>> 
>>>>>> 
>>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>>> 
>>>>>>> Hi,
>>>>>>> 
>>>>>>> Metis arrived safely today in Blighty.
>>>>>>> 
>>>>>>> After installing it, I then used HPSDRProgrammer to update to the 
> latest firmware(Metis  V1.1) and then proceeded to update the firmware on 
> Mercury to v6.4(Diversity) & Penelope to v1.3.
>>>>>>> 
>>>>>>> Everything worked first time :)
>>>>>>> 
>>>>>>> Many thanks to everyone involved.
>>>>>>> 
>>>>>>> 73s
>>>>>>> 
>>>>>>> Steve
>>>>>>> G1YLB
>>>>>>> 
>>>>>>> -----Original Message----- From: Chris Smith
>>>>>>> Sent: Wednesday, March 09, 2011 1:21 PM
>>>>>>> To: hpsdr at lists.openhpsdr.org
>>>>>>> Subject: Re: [hpsdr] Metis
>>>>>>> 
>>>>>>> ***** High Performance Software Defined Radio Discussion List *****
>>>>>>> 
>>>>>>> Ah-ha!  I've just paid the import VAT on Metis and Parcelforce are 
> promising delivery tomorrow (Thur 10th Mar).  Not bad - payment was taken 26th 
> Feb so 12 days from payment to delivery.
>>>>>>> 
>>>>>>> Many thanks TAPR and everyone involved.
>>>>>>> 
>>>>>>> Cheers & 73
>>>>>>> 
>>>>>>> Chris G4NUX
>>>> 
>>>> _______________________________________________
>>>> HPSDR Discussion List
>>>> To post msg: hpsdr at openhpsdr.org
>>>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-
> openhpsdr.org
>>>> HPSDR web page: http://openhpsdr.org
>>>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>> 
>>> 
>> 
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-
> openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>> 
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
> 


 1299850978.0

More information about the Hpsdr mailing list