[hpsdr] Multiple Mercury operations

[Dan Mitchell]

Joe;
Is the jumper necessary when using multiple receivers on ONE Mercury?
73,
Dan, W0IQ

-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Joe Martin K5SO
Sent: Wednesday, November 09, 2011 4:16 PM
To: HPSDR list
Subject: [hpsdr] Multiple Mercury operations

***** High Performance Software Defined Radio Discussion List *****


All,

It is necessary with the new set of firmware that a jumper be placed  
across GPIO pins 2-3 (header J5 on Mercury).  Photos of the  
appropriate jumpers on Mercury J5 for multiple-Mercury operations are  
shown at

http://www.k5so.com/Clock%20connections.html

This jumper was not required before for multiple Mercury operation but  
it is required with the new firmware set.

73,  Joe K5SO


_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/


 1320887271.0