[hpsdr] KissKonsole amplitude calibration

[Phil Harman]

Hi Andrew,

Good to hear that you chased that one down.

The ADC indicator will illuminate if the ADC gets overloaded. Need to find
the cause if this should happen.

73 Phil...VK6APH


> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi Phil,
> Thanks for that, digging further I found that the error was exactly 20dB -
> a clue!  I then tried setting the preamp button to on, voila all the
> indicated levels were then within 1dB!
> So I think 'preamp' for hermes means 'attenuator off'. On my board I
> haven't fitted the Minicircuits digital attenuator hence the problem!
> All makes sense now!
> What is the ADC button for?
> Thanks,
> Andrew_______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/



 1349831639.0