[hpsdr] Hermes Documentation

[Kjell Karlsen]

Hi Dick and All.

Just to clear up some minor details: Hermes as delivered from TAPR is  
prepared to be used with Apollo.

When Hermes and Apollo is installed into the enclosure, Apollo is mounted  
on the bottom with main components facing up (slot 1 from bottom). Hermes  
is inserted into slot 4 from top also with main components facing up. The  
switched power is taken from a 4-pin connector on Apollo to J10 on the  
bottom of Hermes. The same is with RF out (J30) and RX in (J31). The  
control cable from Hermes to Apollo is from J32 to the corresponding  
connector on Apollo.

If Hermes is going to be used with Alex. install J15 on top of Hermes and  
connect a cable to the corresponding connector on Alex. J32 CAN NOT BE  
USED WITH ALEX!

J10 can be removed from the bottom of Hermes and a new straight connector  
installed on top if needed. J28 and J29 can be installed on top of Hermes  
to be used for internal connection to a PA/ TR Switch.

Normally the ON/OFF switch is not used on Hermes.

Hope this is to some help.

73, Kjell









På Tue, 23 Oct 2012 06:54:45 +0200, skrev Dick Faust <k9ivb at cox.net>:

> ***** High Performance Software Defined Radio Discussion List *****
>
> And again with the proper "slash" marks
>
> Direct Links below:
> http://k9ivb.net/Hermes/Prelim_CN_4_Hermes_UM_v1.7.doc
> http://k9ivb.net/Hermes/Tapr_Hermes_top.JPG
> http://k9ivb.net/Hermes/TAPR_Hermes_back_ilst.jpg
>
> Dick
>
> Dick Faust wrote:
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> Lets try again with out all the *%! formatting
>>
>> I am working with Phil to update the Hermes manual version 1.7
>>
>> To assist with list questions, I am posting on my website the current  
>> and temporary information.
>>
>> There is a preliminary change notice [not finished]
>> A photo of the TAPR build top side that needs component identification
>> And an updated  bottom side view [hopeful finished] that should clear  
>> up the power supply questions.
>>
>>
>> Direct Links below:
>> http://k9ivb.net\Hermes\Prelim_CN_4_Hermes_UM_v1.7.doc
>> http://k9ivb.net\Hermes\Tapr_Hermes_top.JPG
>> http://k9ivb.net\Hermes\TAPR_Hermes_back_ilst.jpg
>>
>> If anyone finds any errors please let me know.
>>
>> the word version of the v1.7 manual can be found at:
>> http://svn.tapr.org/repos_sdr_hpsdr/trunk/Hermes/Documentation/
>>
>> 73, Dick Faust K9IVB
>>
>>
>> _______________________________________________
>> HPSDR Discussion List
>> To post msg: hpsdr at openhpsdr.org
>> Subscription help:  
>> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>> HPSDR web page: http://openhpsdr.org
>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:  
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
>


-- 
Sendt med Operas revolusjonerende e-postprogram: http://www.opera.com/mail/

 1350980032.0