[hpsdr] PSDR Level Calibration bug

[Steven Doyle]

The error mentions frequency, but it is in fact produced by the level 
calibration.

73s

Steve
G1YLB

-----Original Message----- 
From: Bruce Beford
Sent: Sunday, April 07, 2013 8:19 PM
To: hpsdr at lists.openhpsdr.org
Subject: Re: [hpsdr] PSDR Level Calibration bug

***** High Performance Software Defined Radio Discussion List *****

I'm not at the rig right now, so can't check this, but...
You say the level calibration is not working, yet the error you posted is
for the frequency calibration. Can you confirm your issue is with freq
calibration, not level calibration?
73,
Bruce, N1RX

> I just noticed that the level calibration in PSDR mRX is not working.
> It reports the following error:
> "Peak is less than 30dB from the noise floor. Please use a larger signal
> for frequency calibration."

> Needless to say my injected signal is well above that.
> It works fine in PSDR OpenHPSDR 2Rx v2.2.14.




_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help: 
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/ 


 1365379273.0