[hpsdr] Pre-distortion Sampler

[Shirley Márquez Dúlcey]

The January 2014 issue of QST has a design for a homebrew signal
sampler. The design uses a capacitive divider with 38dB attenuation
followed by a 22dB resistive attenuator. This might serve as a
starting point for a sampler for predistortion designs.

On Mon, Dec 9, 2013 at 11:35 AM, Tony Hagen <prosdr at gmail.com> wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
>
> I received my Rigol spectrum analyzer few weeks back
> The spectrum analyzer with input requirement of max +20dBm.
>
> Is the pre-distortion sampler can be used to couple the output of Munin or any other amplifier of approx. 200 watts with the spectrum analyzer
>
> 73s
> Tony
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/

 1386792419.0