[hpsdr] New Metis and Hermes code.

[Hermann]

same here, Dan. Already sent a Wireshark protocol to Phil, VK6APH.

New Hermes FW is UFB !

73, Hermann
DL3HVH


On Tue, Feb 19, 2013 at 8:03 PM, Dan Mitchell <danmitchell at embarqmail.com>wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
> With the new Metis code my HPSDR system with PowerSDR (W5WC's latest) stops
> altogether and requires power-cycling of the HPSDR. With the previous Metis
> code, the system only stopped for 1-2 seconds, then recovered. I am now
> testing Hermes to see if something similar happens with its new code.
> 73,
> Dan, W0IQ
>
>
>
>
>
>
>
> -----Original Message-----
> From: hpsdr-bounces at lists.openhpsdr.org
> [mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Phil Harman
> Sent: Saturday, February 16, 2013 7:51 PM
> To: hpsdr at lists.openhpsdr.org
> Subject: [hpsdr] New Metis and Hermes code.
>
> ***** High Performance Software Defined Radio Discussion List *****
>
> All,
>
> There is new Metis (V2.5) and Hermes (V2.3) code available at
> www.openHPSDR.org  \Downloads.
>
> Both new versions remove the need to set a jumper in order to set/reset an
> IP address.  The latest Hermes code increases the sampling rate to 384ksps
> and also fixes a problem that some users reported with occasional audio
> drop
>
> outs.  We are currently working on increasing the sampling rate for
> Mercury.
>
> An announcement regarding the availability of PC software support for the
> faster sampling rate will be made by the respective developers.
>
> We have also split the previous HPSDRProgrammer application into two
> programs - HPSDRProgrammer V2.0 and HPSDRBootloader V2.0.
>
> This will simplify the uploading of new FPGA code to the hardware and also
> setting an IP address. For most Hermes users HPSDRProgrammer V2  is the
> only
>
> program they will need to use.
>
> The second program, HPSDRBootloader V2.0,  provides the bootloader recovery
> and JTAG programming of other HPSDR boards functions.  The user interface
> has been modified to simplify the use of the software.
>
> Both these programs are available at www.openHPSDR.org  \Downloads.
>
> You can still use the previous version of HPSDRProgrammer to load the
> latest
>
> versions of FPGA code but the new features (e.g. setting the IP address)
> will not be available.
>
> New User Guides (Hermes V1.16 and Metis V1.4) that explain how to use the
> new programmer software is available from  www.openHPSDR.org \Documents.
>
> Thanks to Dave, KV0S, for developing the new programmer software and the
> team of  FPGA code beta testers.
>
> 73 Phil....VK6APH
>
>
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130219/76ac7117/attachment-0004.htm>