[hpsdr] Updating an old HPSDR board set

[Dale Boresz]

Thanks for the information Stephen.

In looking at the HPSDR Downloads page on openhpsdr.org, near the top of 
the page I see a reference to "Winpcap" library. Further down the page, 
there is a reference to HPSDRProgrammer_V2, and a little further there 
is HPSDRBootloader.

Where does "Wincap" fit into the picture? Are these multiple mutually 
exclusive paths to programming the cards? Are they dependent upon 
whether Metis is involved or not?

You mention Quartus and USBBlaster, and earlier versions of those were 
what I had used back in 2009/2010. If that's still the proper path - 
great; at least I'm familiar with it ;-)

Not quite sure where to begin, and what works with what...

73, Dale
WA8SRA


On 2/25/2013 7:33 AM, Stephen West-Fisher wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
> I'm using PowerSDR 2.2.9, I do believe there is a newer version out.
> Ozy: 2.4
> Mercury: 3.3
> Penelope: 1.7
>
> What I would do is get current versions of PowerSDR, USBBlaster, and the
> Quartus 12.1 for programming.
> The readme in USBBlaster has the instructions for updating the boards, the
> board to be updated next to the power supply plug with Ozy next to it.
>
> This is all fairly fresh to me as I just finished building and debugging
> (with a lot of help from Joe) Mercury.
> My plan is to use some birthday money to buy the Alex boards and build them
> next.
>
> --
> Stephen West-Fisher
> N4IK
> -----Original Message-----
> From: hpsdr-bounces at lists.openhpsdr.org
> [mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Dale Boresz
> Sent: Monday, February 25, 2013 6:43 AM
> To: hpsdr at lists.openhpsdr.org
> Subject: [hpsdr] Updating an old HPSDR board set
>
> ***** High Performance Software Defined Radio Discussion List *****
>
> Hello,
>
> Due to a lack of free time, my HPSDR Mercury, Penelope, and Ozy hardware has
> been sitting in a drawer since early 2010. I finally have a little more time
> to play now, so I fired everything up yesterday -- and it still works!
> However, I suspect that a few changes and enhancements have been made since
> January 2010
>
> Here's what I currently have running:
> -- PowerSDR v1.10.4 + BaseSVN 2025
> -- Under the PowerSDR > Setup > HPSDR tab, the firmware versions are
> reported as:
>       Ozy FX2: 20090524
>       Ozy: 16
>       Mercury: 27
>       Penelope: 12
>
> The programming environment I have on this machine from back then is:
> c:\altera > 81 > qprogrammer
>
> There is also the following directory:
> EEPROM_BLASTER, which contains a README.txt dated 21 Nov 2009, which is what
> I referenced the last time the firmware was updated.
>
>   From what I've seen on the openhpsdr.org site, I suspect I'm going to want
> to get my hands on Metis and Excalibur cards as well, if possible.
>
> Can anyone pass along a link to a reasonably up-to-date documentation source
> that would address what is needed to get these modules updated to the latest
> code in a Windows enviroment (either XP or Win7 64-bit)? I see that the
> 'Downloads' page on openhpsdr.org seems to have current information, however
> I haven't seen anything describing the process involved in updating the
> firmware. For example, I remember back then that the physical ordering of
> the cards on the backplane was significant. If the only answer is to start
> clicking links and reading
> -- that's what I'll do. I just wanted to make sure I wasn't missing a
> consolidated set of instructions that might save some time.
>
> Thanks in advance!
>
> 73, Dale
> WA8SRA
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>


 1361797086.0