[hpsdr] request PowerSDR feature

[John]

Hi Eric,

As far as I know, there is not a general calling frequency for CW on six 
meters.  Therefore it would be useful to be able to monitor a large 
segment of the CW band and then "robotically" tune to any signal (the 
strongest) from the panoramic data and receive it using a CW filter.  
The squelch just works on signals in the pass-band.

73,   John  WoGN

On 6/10/2013 10:48 AM, Erik Skovgaard wrote:
>
> Hi John,
>
> Could you not simply use the squelch?
>
> 73 de ve7mdl,          ....Erik.
>
> On Jun 10, 2013 4:58 AM, "John" <radio at mediacombb.net 
> <mailto:radio at mediacombb.net>> wrote:
>
>     ***** High Performance Software Defined Radio Discussion List *****
>
>
>     After operating in the ARRL VHF contest on six meters this last
>     weekend I have been wondering if an added feature to PowerSDR
>     would be useful (and practical).  It seems to me there is a lot
>     more CW operation on 6 meters than there used to be and when
>     conditions are poor a lot of guys run CW.
>
>     Could the software have an option to tune the receiver to the
>     frequency of the strongest signal as shown in the panoramic
>     display?  That way I could turn the volume up and do other things
>     around the house.  When the band was open and CW signals were
>     coming through I could hear them and quickly run to the radio.
>
>     73,   John  WoGN
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20130610/10c44744/attachment-0004.htm>