[hpsdr] ANAN-100D TX Spectrum

[f6bki at orange.fr]

Hi Warren , YES ALC is enable , tried with and without ALC , no change .
73
Jacques F6BKI

-----Message d'origine----- 
From: Warren C. Pratt
Sent: Monday, May 13, 2013 5:39 AM
To: f6bki at orange.fr ; hpsdr at lists.openhpsdr.org
Subject: RE: [hpsdr] ANAN-100D TX Spectrum

Hello Jacques,

Here's one idea:  Please check to be sure that you have your ALC ENABLED
(the ALC box should be checked).  I don't know if this is the problem you're
seeing; however, failure to use the ALC can cause this and worse.  The ALC
should ALWAYS be enabled.

I hope that helps.  If not, I suppose further investigation will be
required.

73,
Warren  NR0V

-----Original Message-----
From: hpsdr-bounces at lists.openhpsdr.org
[mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of f6bki at orange.fr
Sent: Sunday, May 12, 2013 3:51 PM
To: hpsdr at lists.openhpsdr.org
Subject: [hpsdr] ANAN-100D TX Spectrum

***** High Performance Software Defined Radio Discussion List *****

Hello all , today I have  checked the RF Spectrum on transmit of my new
ANAN-100D.
On 6m there are plenty of spurious about 50 dB below the carrier from 50MHz
down to few MHz .
The ratio Spurious/Carrier  is almost independant of the power level, in
comparaison an IC7000 is at least 20 dB better around the carrier and much
better away from the carrier. .
On the other bands the spurious are about -60 dB below the carrier .
Looks very high !!!! No way to drive an amplifier with such a signal!!!
Mesurements have been made on a 50 Ohms load on an  ADVANTEST Analyseur .

As anybody checked his ANAN-100D ??

73
Jacques F6BKI



_______________________________________________
HPSDR Discussion List
To post msg: hpsdr at openhpsdr.org
Subscription help:
http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
HPSDR web page: http://openhpsdr.org
Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/ 


 1368429039.0