[hpsdr] Before I BURN MUNIN

[Kjell Karlsen]

Hi Tony.

No problem, it is shorted through the output transformer and that is right.

Just follow the Munin2 Bias settings:  
http://k9ivb.net/munin2/Munin2_Bias_Setup_08-18-2013.pdf.

Then you are ready to connect it to your exciter and adjust the drive  
levels for 100W output (or near that) on all bands.

Good luck!

73, Kjell




På Sat, 05 Oct 2013 21:08:00 +0200, skrev Tony Hagen <prosdr at gmail.com>:

> I just constructed Munin. My first approach was to check whether the  
> following pairs are short or not through continuity tester:
> Positive and Negative terminal
> Input Terminal
> Output Terminal
> What I found the output terminal is showing SHORT through a continuity  
> tester – is it correct
> 73s
> Tony


-- 
Sendt med Operas e-postklient: http://www.opera.com/mail/

 1381007376.0