[hpsdr] PowerSDR/openHPSDR v3.2.10 released

[Doug W5WC]

All,

******** You should remove the database.xml file. ********

PowerSDR_mRX_3.2.10 is now available for download on the
http://openhpsdr.org website. Features added to this release includes:

AmpView Form - This form allows you to see in real-time the gain and phase
characteristics of your amplifier. More details are provided in the
PureSignal User Guide 2014-03-14 pg 7-8.

A few changes have been made to the various delays found on the
Setup=>Options page. The PTT Delay was removed as the MOX Delay provides the
same feature. A RX Delay was added to provide delay between the PTT Out
dropping and the receiver turning back on. The CW Key-Down Delay sets the
time between the key down and when the RF is produced. 

For the ANAN users you will find a separate PA disable control for HF and
VHF use. The Disable HF PA control is on the Setup=>Ant Filters=>Antenna
page and the one for VHF is on the XVTRs Form.

A couple of new controls were added to the Setup=>Ant Filters=>HPF/LPF page.
One is for controlling the 6m preamp and the other allows for the HPF to be
in a disabled condition during transmit. This will ground all relay paths
including bypass.

The AGC Decay can now be set as low as 1mS when using the AGC Custom mode.
This was done so that you can select very fast AGC recovery on RX2 for
full-duplex CW operation.

73,
Doug, W5WC
Warren, NR0V