[hpsdr] PowerSDR/OpenHPSDR mRX PS v3.2.16 released

[Jim Sanford]

Is there any particular version of the FPGA code I must install before 
powering up mRXPSv3.2.16?
Finally getting ready to power this stuff up!
Thanks & 73,
Jim
wb4gcs at amsat.org

On 6/19/2014 6:32 PM, John wrote:
> ***** High Performance Software Defined Radio Discussion List *****
>
>
>
> Hi Doug,
>
> Are there any files that should be deleted before installing v3.2.16?
>
> John,  WoGN
>
> At 08:09 AM 6/18/2014, Doug Wigley wrote:
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> All,
>>
>> PowerSDR/OpenHPSDR mRX PS v3.2.16 has been released.
>>
>> Changes and additions made to this release are:
>>
>> - CW APF Bandwidth minimum is now 10Hz.
>> - Displays ADC overload condition for Angelia and Orion for each ADC.
>> - 6m LNA gain offset can be manually adjusted using the spinner 
>> located on
>> the Setup=>Calibration page.
>> - TX Display Offset affects both normal and DUP transmit displays.
>> - TX Display Min-Max scale updates correctly when adjusting levels.
>> - Signal level meter adjusted to read S9 = -93dBm for frequencies above
>> 30MHz. S9 = -73dBm below 30MHz. 1 S-unit = 6dB.
>>
>> This release can be downloaded from the openhpsdr.org website.
>> http://openhpsdr.org/download.php
>>
>> 73,
>> Doug W5WC
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: 
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


 1403407251.0