[hpsdr] Hermes Status LED

[Tony Hagen]

I need some help with a TAPR Hermes board.

What could be the possible reasons for not turning ON the status LED of TAPR Hermes board

and also the Calibration is not taking place if I feed a signal of 10Mhz / 14.01 Mhz with –70dbm – there is no action for long time.


73s
Tony
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20141014/3fbdc6fa/attachment-0002.htm>