[hpsdr] Powersdr 3.2.27 and RTTY

[Mike F]

In September I posted the message below.  I have received one reply 
(from Ken, N9VV) and have tried his suggestion (reset database) multiple 
times to no avail.  I have installed 3.2.28 and immediately 3.2.29. 
3.2.29 is still the same.  I have jpgs of the transmit spectrum for both 
3.2.1 and 3.2.27, but don't believe I can post them here.  Send me an 
email if you would like the jpgs.

Anyone with any ideas.

Mike, K7SR
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 30 Sep 2015 15:35:08 -0700
> From: Mike F <mikecf100 at gmail.com>
> To: hpsdr at lists.openhpsdr.org
> Subject: [hpsdr] Powersdr 3.2.27 and RTTY
> Message-ID: <560C639C.4040705 at gmail.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I tried using FLDIGI and PSDR to send some RTTY over the weekend.  I
> could receive fine, but no one could understand me.  They kept saying
> "agn".  I have used the same setup numerous times before with no problem.
>
> I contacted a friend and verified that he and I had the same problem.
> He said that my fsk tones looked like they were individually psking.  I
> tried numerous things, like carefully reading and trying any PSDR/RTTY
> setup writeup, and there are a lot of them.  I also configured mmrtty
> and verified that I had the same problem there.
>
> I finally decided to try an older version of PSDR (3.2.1) and all worked
> fine.  I then went through the setup windows for the two versions and
> made them match the best I could.  (setup changes with version)  3.2.27
> still doesn't work.  The transmit waveform for the two versions look
> very different
>
> My system is: Mercury, penelope, metis.
>
> Mike Fager, K7SR
>
>