[hpsdr] PowerSDR/OpenHPSDR mRX PS v3.2.28 released

[Roger Rehr W3SZ]

Hi All,

Leif would also be most interested in any cases where the PowerSDR noise 
blankers prove to be inadequate/ineffective.

The contact information, etc. remain as noted below.

Thanks again to Doug and Warren for all they do!

73,

Roger Rehr
W3SZ

On 10/4/2015 11:52 PM, Roger Rehr W3SZ wrote:
> Thanks for a great release, Doug and Warren!
>
> The SNB in particular sounds like a great addition to PowerSDR.
>
> Leif SM5BSZ, author of Linrad, has a long-standing interest in noise 
> reduction.  He would be very interested in wide-band recordings of 
> noise that are effectively dealt with by the SNB.
>
> If anyone using the new version of PowerSDR encounters such noise, 
> please send a wideband recording to Leif, or if you prefer to me, and 
> I will forward to him.
>
> If you also send a recording of the captured audio after processing, 
> both with and without the SNB, so much the better.
>
> But the wide band recording is the primary interest, as it can be used 
> to compare the effectiveness of various noise reduction schemes.
>
> Leif's email is leif@ his call [lower case] dot com.
>
> Thanks in advance  for this help, and thanks again guys for this great 
> new release!
>
> 73,
>
> Roger Rehr
> W3SZ
>
> On 10/3/2015 10:54 PM, Doug W5WC wrote:
>> ***** High Performance Software Defined Radio Discussion List *****
>>
>> All,
>>
>> PowerSDR/OpenHPSDR mRX PS v3.2.28 has been released.
>>
>> This release can be downloaded from the openhpsdr.org website.
>> http://openhpsdr.org/download.php
>>
>> This release contains the following changes:
>>
>> Radio Astronomy (RA) Joe, K5SO
>> - added Rx2 to the RA feature to allow both Rx1 and Rx2 data to be
>> simultaneously collected/viewed
>> - added a new control to the RA display to allow the selection among 
>> options
>> of
>>     1) simultaneous display of Rx1 data and Rx2 data,
>>     2) display of Rx1 data only, or
>>     3) display of Rx2 data only
>> - added Rx2 data to the read/write-to-disk option from the RA window; 
>> data
>> format for each line of the .csv file is
>>         time(secs), Rx1(dBm), Rx2(dBm)
>>     regardless of what option is selected for display in the RA window
>> - added a compiler directive to try to resolve the EU vs US 
>> formatting issue
>> of the previous RA read/write to .csv files
>>
>> Spectral Noise Blanker (SNB)