[hpsdr] Hermes, no mic audio

Barry N1EU n1eu.barry at gmail.com
Fri Mar 18 00:42:30 PDT 2016


Use the "Allow PTT to override/bypass VAC for Phone" option

Barry N1EU

On Fri, Mar 18, 2016 at 12:35 AM, Glen <glenk4kv at mds-ham.com> wrote:

> ***** High Performance Software Defined Radio Discussion List *****
>
> Bill,
>
> Thanks.  Just got it to work.  I turned off VAC1.  It was disabling the
> mic somehow.  Now, I want my cake and I want to eat it too.
>
> I want to use my computer to listen to the rx, but still use the mic.
>
> I will keep playing.'
>
> Thanks for the tips, at least I learned about the mic boost!
>
> 73's
>
> Glen K4KV
>
>
> -----Original Message-----
> From: Bill Diaz [mailto:william.diaz at comcast.net]
> Sent: Thursday, March 17, 2016 8:19 PM
> To: Glen
> Subject: Re: [hpsdr] Hermes, no mic audio
>
>
> Glen,
>      The Setup, Transmit tab has the mic audio settings.  You could try
> checking 20db mic boost if using the Mic in connector on Hermes to see
> if this helps.  With this checked, and main window MIC activated you
> should be able to adjust your SSB modulation with the slider.  I have
> 20db mic boost checked, and the Mic slider set to 7 at the moment and it
> works ok.
>
> HTH,
> Bill KC9XG
>
>
> On 3/17/2016 18:42, Glen wrote:
> > ***** High Performance Software Defined Radio Discussion List *****
> >
> > Hello,
> >
> > I have finally started transmitting with my: Hermes, hb filter board, and
> > Munin2 amp.
> >
> > No problem with TUNE producing power on any band, seems to be fine...
> >
> > However, I cannot see any modulation on SSB.  Thought immediately that
> the
> > mic audio was
> > not making it to the CODEC, but it is, about 50mv worth.
> >
> > The headphones work through the CODEC.
> >
> > Is there some setting in PSDR that disables the mic audio???
> >
> > BTW, I have two Hermes boards, and both will not modulate, but both can
> xmit
> > a carrier.
> >
> >
> > 73's
> >
> > Glen K4KV
> >
> > _______________________________________________
> > HPSDR Discussion List
> > To post msg: hpsdr at openhpsdr.org
> > Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> > HPSDR web page: http://openhpsdr.org
> > Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
> >
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20160318/6e3f9411/attachment-0001.htm>


More information about the Hpsdr mailing list