[hpsdr] Looking for PowerSDR help

[Scott Traurig]

My apologies, Doug, but I'm not very familiar with the TX2 and HF2
hardware. Perhaps it has something to do with that.

73,

Scott


On Sun, Mar 27, 2016 at 8:37 PM, Doug Ronald <doug at dougronald.com> wrote:

> Scott,
>
>
>
> I changed to 48 KHz everywhere, and tried both 16 bit and 24 bit audio,
> and I hear the sound (WWV at the moment) but it sounds like a buffer of
> audio, then a pause, then another buffer, such that there is sort-of like a
> hiccup. If I change the Buffer Size in AudioàVAC1, say to 128 instead of
> 2048, then I get a gurgle instead of a hiccup. It definitely seems like
> some incompatibility in the audio stream, but at least I’m making progress.
>
>
>
> By the way, my CPU usage is 16%, memory is only 20%, so I’m not out of
> resources other than maybe the network.
>
>
>
> -Doug
>
>
>
> *From:* Scott Traurig [mailto:scott.traurig at gmail.com]
> *Sent:* Sunday, March 27, 2016 5:23 PM
> *To:* Doug Ronald <doug at dougronald.com>; 'hpsdr' <
> hpsdr at lists.openhpsdr.org>
> *Subject:* Re: [hpsdr] Looking for PowerSDR help
>
>
>
> Doug,
>
> Change everything to 48KHz. Make certain your devices are set to 48KHz in
> Windows Sound Control Panel.
>
> 73,
>
> Scott/w-u-2-o
>
> ------------------------------
>
> *From:* Doug Ronald <doug at dougronald.com>
> *Sent:* March 27, 2016 8:17:21 PM EDT
> *To:* 'hpsdr' <hpsdr at lists.openhpsdr.org>
> *Subject:* Re: [hpsdr] Looking for PowerSDR help
>
>
>
> ***** High Performance Software Defined Radio Discussion List *****
>
> Thanks to John, and Barry's suggestions, now I'm getting audio, but it
> hiccups in step with the panadapter display update. I set the sample rate in
> my audio device to 16 bit 44.1 kHz, and the same in HDSDR. I hear the audio,
> but not in a steady stream. I upped the priority of the program to real time
> with no change. I see the network traffic pretty steady at 32 Mbps and my
> network has a ceiling of 54 Mbps, so maybe that is the bottleneck. I'll move
> the computer directly to the
> BeMicro CVA9 and see if that clears the audio up...
>
> Thanks all,
> -Doug W6DSR
>
> -----Original Message-----
> From: Hpsdr [mailto:hpsdr-bounces at lists.openhpsdr.org <hpsdr-bounces at lists.openhpsdr.org>] On Behalf Of Doug
> Ronald
> Sent: Sunday, March 27, 2016 3:45 PM
> To: 'hpsdr' <hpsdr at lists.openhpsdr.org>
> Subject: [hpsdr] Looking for PowerSDR help
> Importance:
>
> Low
>
> ***** High Performance Software Defined Radio Discussion List *****
>
> Apologies if this is not an appropriate reflector for this question, and If
> not, maybe someone will direct me...
>
> Anyway, I cannot get the PowerSDR program to work on any of 3 computers. All
> problems are with Virtual Audio Cable (VAC). I can see the program working,
> in that I see an active spectral display, until I activate VAC1, then I get
> an Invalid Sample Rate dialog, and the program freezes. The programs HDSDR,
> and SDRSharp work fine on all 3 computers.
>
> Needless to say, I've searched Internet for this error, not finding anything
> useful for my problem. I've tried earlier releases of PowerSDR with the same
> result. I've permuted all selections in the Audio dialog box, to no avail.
> Any new ideas will be most welcome as it seems that PowerSDR is only program
> that will run the TX2 and HF2 hardware.
>
> Thanks,
> -Doug Ronald
> W6DSR
>
> ------------------------------
>
>
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
> ------------------------------
>
>
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20160328/6ef7fda1/attachment-0002.htm>