[hpsdr] Looking for PowerSDR help

[Doug Ronald]

Well, I have PowerSDR working. The audio hiccupping was due to my wireless
network saturating at 36 Mbps, and the Invalid Sample Rate error came from
not having the sound card's sample rate aligned with what PowerSDR was set
to.

I have my computer connected directly to the BeMicro CV A9 via a crossover
cable, and the resource monitor is reporting: Send is 3.3 Mbps, and the
Receive is 46 Mbps. Wow! I can hardly wait for Thetis - not, which will
require GigE. I'll have to site a computer with the hardware to permanently
solve my network anemia.

Thanks to all who helped with my problems, -Doug W6DSR

-----Original Message-----
From: Hpsdr [mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Doug
Ronald
Sent: Sunday, March 27, 2016 3:45 PM
To: 'hpsdr' <hpsdr at lists.openhpsdr.org>
Subject: [hpsdr] Looking for PowerSDR help
Importance: Low

***** High Performance Software Defined Radio Discussion List *****

Apologies if this is not an appropriate reflector for this question, and If
not, maybe someone will direct me...

Anyway, I cannot get the PowerSDR program to work on any of 3 computers. All
problems are with Virtual Audio Cable (VAC). I can see the program working,
in that I see an active spectral display, until I activate VAC1, then I get
an Invalid Sample Rate dialog, and the program freezes. The programs HDSDR,
and SDRSharp work fine on all 3 computers.

Needless to say, I've searched Internet for this error, not finding anything
useful for my problem. I've tried earlier releases of PowerSDR with the same
result. I've permuted all selections in the Audio dialog box, to no avail.
Any new ideas will be most welcome as it seems that PowerSDR is only program
that will run the TX2 and HF2 hardware. 

Thanks,
-Doug Ronald
W6DSR