[hpsdr] CW sidetone through speakers on PC instead of Headphone on ANAN SDR

[Joe Martin]

It can be done if you disable FPGA CW generation (i.e., select the option to generate the CW in the PC rather than in the FPGA) but as a practical matter it’s a moot point due to the latency involved with VAC.  

73, Joe K5SO

On May 4, 2016, at 7:56 PM, Scott Traurig wrote:

> I don't think there is any sidetone available via VAC.
> 
> 73,
> 
> Scott/w-u-2-o
> 
> On Wed, May 4, 2016 at 9:52 PM, Joe Martin <k5so at k5so.com> wrote:
> ***** High Performance Software Defined Radio Discussion List *****
> 
> You can achieve that situation by setting up and enabling one of the VAC (virtual audio cable) options in HPSDR PowerSDR but it is not at all a good idea for CW operations as you will find that there is considerable latency when routing the CW sidetone via the VAC audio connections.  By contrast, there is negligible latency when using the SDR speaker jack.
> 
> 73, Joe K5SO
> 
> On May 4, 2016, at 4:23 PM, <melm at reliable.net> wrote:
> 
> > I am looking for a way to have the sidetone from CW route through the PC speakers rather than the ANAN SDR speaker jack .
> >
> >
>