[hpsdr] CW sidetone through speakers on PC instead of Headphone on ANAN SDR

[Scott Traurig]

Where is that option in the setup, BTW?

73,

Scott

On Wed, May 4, 2016 at 10:12 PM, Joe Martin <k5so at k5so.com> wrote:

> It can be done if you disable FPGA CW generation (i.e., select the option
> to generate the CW in the PC rather than in the FPGA) but as a practical
> matter it’s a moot point due to the latency involved with VAC.
>
> 73, Joe K5SO
>
> On May 4, 2016, at 7:56 PM, Scott Traurig wrote:
>
> > I don't think there is any sidetone available via VAC.
> >
> > 73,
> >
> > Scott/w-u-2-o
> >
> > On Wed, May 4, 2016 at 9:52 PM, Joe Martin <k5so at k5so.com> wrote:
> > ***** High Performance Software Defined Radio Discussion List *****
> >
> > You can achieve that situation by setting up and enabling one of the VAC
> (virtual audio cable) options in HPSDR PowerSDR but it is not at all a good
> idea for CW operations as you will find that there is considerable latency
> when routing the CW sidetone via the VAC audio connections.  By contrast,
> there is negligible latency when using the SDR speaker jack.
> >
> > 73, Joe K5SO
> >
> > On May 4, 2016, at 4:23 PM, <melm at reliable.net> wrote:
> >
> > > I am looking for a way to have the sidetone from CW route through the
> PC speakers rather than the ANAN SDR speaker jack .
> > >
> > >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20160504/79f95ade/attachment.htm>