[hpsdr] Anan200d and pure signal

[Abhi A]

Hello Onno,

Welcome, using PureSignal with an external amplifier requires the following:

1. in PowerSDR mRX go to Setup----ANT/Filters Tab and check "Bypass on Tx"
2. Connect the output (low Level) of your coupler to the BYPASS port on the
radio, please note that the input level must not exceed +13dBm.


There is a fantastic video by Nige, G7CNF which I would recommend that you
watch:

https://youtu.be/0adHZOTqTlQ

Please also refer the User manual pages 40-43:

https://apache-labs.com/downloadsfiles/1022_ANAN-200D-Users-Guide.pdf

Hope this helps,

Abhi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/attachments/20160519/ddfee27e/attachment.htm>