[hpsdr] database troubles

[Glen]

Hello,

I have talked to Anan users, and they too have troubles with PSDR
"losing it's mind" and doing very odd things now and then.

My own system has crashed a number of times, and reloading a known
good working database does NOT fix the problem...

I think everyone is aware of these problems, but, as they say, if
you do not say something, the programmers may never know...

Here is what I did to cause the 'problem'

I stopped PSDR, but did not exit it.
I unplugged the Ethernet cable to move the rig, so I could get access
to one of the rear cables.  After that was finished I restarted PSDR,
forgetting to plug the Ethernet cable back in.

I got an error message in PSDR.  After restoring the cable and restarting
PSDR, things did not seem right.  No power out on ANY band above 30M.
Exited PSDR, turned off the rig.  Restarted rig, then PSDR.  No change,
still
no power out.  Loaded previous, known good database.  No help.

Only a database reset restored the system...

Thanks for listening!

73

Glen K4KV
Moultrie, GA
Hermes 3.1, PSDR 3.3.7(4/13/16)