[hpsdr] Openhpsdr-e Wireshark plugin version 0.0.6 released.

[Matthew J Wolf]

I have updated my Wireshark plug-in for the openHPSDR Ethernet Protocol. 
The plug-in has been updated to version 3.5 of the protocol documentation.

You can get the newest version 0.0.6 from my github account at:

https://github.com/matthew-wolf-n4mtt/openhpsdr-e/releases

I think the plug-in is now correctly disassembling all of the protocol.

There are 64 bit compiled versions for Microsoft Windows and Linux 
ADM64. There are basic installation instructions in the archive files 
for the compiled versions.

I did not send a notice to the list about the last release. I have 
included the change log for last version.

Version 0.0.6:
   - Wireshark version 2.2.3
   - Updated to version 3.5 of protocol documentation.
   - Corrected and cleaned up High Priority Command (HPC) Alex0 register map
     bits.
   - Tested and verified set IP address and firmware programing.
   - Cleaned up Command Reply (CR) Hardware Erase Acknowledgment / Complete.
   - Cleaned up Command Reply (CR) Hardware Program Reply / Acknowledgment.
   - Removed "Program Check Roll Over" test. The last program block from 
the host
     is padded. The packet length test will discover what the removed 
test was
     trying to discover.
   -Added Orion MkII (ANAN-8000DLE) details.
     Command Reply (CR):
       - Added to Discovery reply
     High Priority Status (HP):
       - Change label for bits 0 to 4 of byte 59.
     High Priority Command (HPC):
        -Added text string listing Alex0 register map bits not used by
         Orion MkII (ANAN-8000DLE).
        -Added Alex0 TX RX Orion MkII (ANAN-8000DLE) status bit.
        -Added bit 1400: Transverter Enable, IO1 Audio state.

Version 0.0.5:
   - Wireshark version 2.2.3
   - Changed the number of audio samples from 360 to 64 for DDCA and 
from 720
     to 64 for MICL.
   - The plug-in should be up to date with the 3.2 version of the Protocol
     Document.


-Matt, N4MTT