[hpsdr] Orion_v4.6/ANAN-200D firmware download package

[K4KV]

Joe,

Now that I think about that, I have used serial latch chips for years, 
and, when trouble arose, it was almost
always fixed by slowing the clock rate down....

73

Glen K4KV

On 3/19/2017 22:15, Joe Martin wrote:
> Hi Glen,
>
> Yes, it could be.  Phil is the official custodian of the Hermes firmware.  But if I can find source code for the latest Hermes firmware I will prepare a version for you that sends the Alex data word twice to see if that cures your problem.  If it does we can see if Phil will put that modification into the Hermes public version.
>
> I’ll let you know if I can find it and get that done for you tomorrow.
>
> 73, Joe K5SO
>
>> On Mar 19, 2017, at 6:01 PM, K4KV <k4kv at k4kv.com> wrote:
>>
>> Joe,
>>
>> I know it could be my equipment, but I see my CW output fail in about 1 in 10 transmissions using
>> Hermes and Alex.  It kind of sounds like the relays are picking up, but there is no output.
>>
>> Could this be a related problem on Hermes and Alex as well?
>>
>> BTW, this has never been a problem on SSB.
>>
>> 73
>>
>> Glen K4KV
>> Moultrie, GA
>>
>> On 3/19/2017 19:41, Joe Martin wrote:
>>> ***** High Performance Software Defined Radio Discussion List *****
>>>
>>> All,
>>>
>>> An Orion_v.6/ANAN-200D firmware download package is available from
>>>
>>> www.k5so.com/HPSDR_downloads.html
>>>
>>> This version modifies the Alex SPI bus control code on Orion (MkI) to send the Alex data word two times each times the Alex data word changes.  This modification improves relay switching reliability for Alex filter sets and the PA/filters in the ANAN-200D.
>>>
>>> 73, Joe K5SO
>>>
>>> _______________________________________________
>>> HPSDR Discussion List
>>> To post msg: hpsdr at openhpsdr.org
>>> Subscription help: http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
>>> HPSDR web page: http://openhpsdr.org
>>> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>>
>>