[hpsdr] Thetis VAC problem

[Oleg Skydan]

Hi, Bryan!

> To which VAC (VAC1 or VAC2) are you referring?
I tried both VAC1 and VAC2 with the same result, first receiver or both 
receivers were active.

73!
Oleg UR3IQO

> From your description, it sounds like you are trying to run VAC2 while RX2
> is off.
> Is that the case?
>
> 73, Bryan W4WMT
>
> -----Original Message-----
> From: Hpsdr [mailto:hpsdr-bounces at lists.openhpsdr.org] On Behalf Of Oleg
> Skydan
> Sent: Wednesday, April 17, 2019 12:09 AM
> To: hpsdr at openhpsdr.org
> Subject: [hpsdr] Thetis VAC problem
>
> ***** High Performance Software Defined Radio Discussion List *****
>
> Hi, List!
>
> I have a problem with the VAC on Thetis (v2.6.4, Windows 8 64x). It just
> does not work regardless of the used Driver/Input/Output/Sample Rate and
> other settings on the VAC page. The Underflow counter on the TO VAC and
> Overflow counter on the FROM VAC groups run up quickly. Everything other 
> on
> Thetis seems to work finely.
>
> There is a little chance I mess up something in the board firmware (I use
> modified Angelia firmware on my own board), but it works flawlessly with 
> the
>
> SDR Console v3 and exchange with Thetis in the MMA looks good.
>
> Am I missing something? Any ideas?
>
> Thanks!
> Oleg
> 73 de UR3IQO
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help:
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/
>
>
> _______________________________________________
> HPSDR Discussion List
> To post msg: hpsdr at openhpsdr.org
> Subscription help: 
> http://lists.openhpsdr.org/listinfo.cgi/hpsdr-openhpsdr.org
> HPSDR web page: http://openhpsdr.org
> Archives: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/